current language
Bahrain available in the following languages:
or select your TÜV Rheinland region / country website:
Choose country/ region and language

Inspection Optimization

Risk Based Inspection Services| TÜV Rheinland

Increase your plant reliability by optimizing your inspections

Optimisation of Inspection Strategies will lead to a reduction in the turnaround scope and unplanned shutdowns, as well as effective maintenance, and increased production uptime.

It can be achieved through identification of applicable damage mechanisms specific to each individual asset, calculation of the expected degradation rate and selection of the best inspection approach(es) to detect and monitor the identified failure mechanisms.

We help you to increase your plant reliability by providing a wide range of tailor-made inspection solutions like Non-Intrusive Inspections (NII), Risk Based Inspection (RBI) support and Extended Lifetime / Fitness for Service programs.

Our NDT experts have the necessary capabilities and knowledge of both the inspection methods as well as the applicable degradation mechanisms to close the bridge between inspection preparation and the application of these inspection technologies.

Challenges: Optimization of the inspection efforts in a quick changing technical environment

The preparations and execution of the inspections are in general driven by a statutory framework. Traditionally the inspection preparation is based on general guidelines and industry practices, which could be prescriptive without taking into account the specifics of an individual asset like its actual condition and damage mechanisms.

This often leads to the use of traditional inspection methods, which do not guarantee the detection of degradation that could compromise the integrity of the assets. Degradation visible to the naked eye will be observed, but more critical changes in the material can easily being left undetected. Consequently, this ineffective inspection approach can result in extra downtime, safety risks and avoidable maintenance costs.

Here is an overview of the consequences and other relevant challenges:

  • Potential health, safety and environmental (HSE) risks
  • High costs due to turnaround scope and unplanned shutdowns
  • Aging industrial assets
  • Ineffective inspections may lead to undetected defects
  • Limited in-house inspection expertise
  • Increasing complexity of new NDT technologies (e.g. use of robotics, drones, AI)

Benefit from our inspection optimization services

Have a look at the benefits of using our inspection optimization services:

Optimize the efficiency of inspections

Optimisation of the inspection strategies can be achieved through identification of applicable damage mechanisms specific to each individual asset, calculation of the expected degradation rate and selection of the best inspection approach(es).

Minimize the HSE risks during the full life-time of the equipment

Performing any inspection from inside of a vessel adds significant Health and Safety risks and requires extra preparation and management costs. Performing Non-Intrusive Inspection could resolve this challenge.

Increase plant and equipment reliability

Plant and equipment reliability can be significantly increased by applying Non-Destructive Testing techniques. Well selected NDT can identify defects and discontinuities before they grow to a size that could cause failure.

Mitigate risk of unplanned shutdowns and accidents

With the selection of advanced NDT in lieu of radiography, significant time savings can be achieved through the reduction of the evacuation window.

Increase production uptime and availability of assets

Applying NDT methods leads to an increasing integrity and availability of assets, improvement of their reliability and consequently enlarging the production uptime.

Lower intervention costs associated with equipment preparation

By applying Non-Intrusive Inspection intervention costs for equipment preparation can be reduced.

Our inspection optimization services: Increase reliability of your equipment with effective inspection approaches

We provide comprehensive range of services to develop the tailor-made inspection strategies specifically for your needs and assets. Our services include:

Non-Intrusive Inspections (NII)

Traditionally during the shutdown equipment is opened and cleaned in order to be inspected and then closed again. Same approach applies to those vessels that do not require cleaning, parts replacement or regeneration. As such high costs are associated with shutting down a vessel, isolating it and preparing it for an entry, followed by putting it back to service after the inspection.

Continuous uninterrupted production can be achieved by using specialist on-stream Non Intrusive Inspection (NII) solutions. This means that asset operators do not need to shut down their facilities in order to inspect the material´s properties of critical equipment.

TUV Rheinland can offer a structured procedure for an efficient implementation of Non-Intrusive Inspection in your organisation, including but not limited to:

  • Definition of degradation mechanisms
  • Selection of NDT techniques to detect the identified degradation
  • NDT procedure preparation and/or independent review
  • Result evaluation

Risk Based Inspection (RBI) support

Risk-based inspection (RBI) is an optimal maintenance business and inspection strategy used to examine equipment such as pressure vessels and piping in industrial plants.

Probability of failure is estimated on a basis of the types of degradation mechanisms and the available information of the status of the equipment. Consequence of failure can be defined for all consequences that are important, such as safety, economy and environment. Consequence of failure is evaluated as the outcome of a failure based on the assumption that such failure will occur.

TUV Rheinland can assist in the preparation of the inspection based on the output of the RBI study. This can include but not limited to:

  • Inspection plan preparation
  • NDT procedure preparation and/or independent review
  • Result evaluation

Extended Lifetime / Fitness for Service programs

The first process step of Extended Lifetime / Fitness for Service programs is to create a model defining critical areas with possible occurring defects. Followed up by a detailed inspection report, which presents the current status of the equipment. Acceptance criteria for defects and required actions can be defined to enable keeping the equipment in service in a safe and reliable manner. Consequently, on the full assessment and possible defects found, a follow up inspection plan will be generated.

TUV Rheinland with its affiliated companies can assist in the full scope of the extended lifetime programs.

  • Fatigue assessment
  • Primary inspections
  • Fitness for Service calculation
  • Inspection follow up & Monitoring

Your experienced partner for inspection optimization

Our international network of experts develops customized inspection optimization strategies according to individual needs and environments. We work to improve the quality, safety, productivity and profitability of your assets. As a recognized, global partner, we provide you comprehensive non-destructive testing services from a single source to increase the reliability of your assets.

Contact us and put our NDT experts to work for you!

Related services

Asset Integrity Management (AIM)

Asset Integrity Management (AIM)

It is a comprehensive approach to ensure the safe, reliable, and efficient operation of physical assets throughout their life cycles. Get to know more about our solutions.

Non-Destructive Testing (NDT)

Non-Destructive Testing (NDT)

It is a comprehensive approach to ensure the safe, reliable, and efficient operation of physical assets throughout their life cycles. Get to know more about our solutions.

Maintenance and Materials Testing

Maintenance and Materials Testing

Putting plants and components to the test. Discover our portfolio now.

NDT Consultancy Services

NDT Consultancy Services

We support you with comprehensive NDT Level III consultancy services.

Contact

Contact us to request a non-binding offer

Contact us to request a non-binding offer

Get in contact with us!

Last Visited Service Pages